Rezultati - Mariola Saternus

  • Mostrando 1 - 17 resultados de 17
Refinar Resultados
Seznam   Mreža  
  1. 1

    Evaluation and Current State of Primary and Secondary Zinc Production—A Review od Henryk Kania, Mariola Saternus

    Izdano 2023-02-01
    Polni tekst
    Artigo
    Dodaj v priljubljene
    Shranjeno v:
  2. 2

    Advanced Processes in Metallurgical Technologies od Mariola Saternus, Ladislav Socha

    Izdano 2024-09-01
    Polni tekst
    Artigo
    Dodaj v priljubljene
    Shranjeno v:
  3. 3

    Energy Value Stream Mapping (EVSM) as a Tool for the Analysis and Reduction of Energy Consumption in Manufacturing Processes od Szymon Pawlak, Mariola Saternus

    Izdano 2026-05-01
    Polni tekst
    Artigo
    Dodaj v priljubljene
    Shranjeno v:
  4. 4

    Physical Modelling of Aluminum Refining Process Conducted in Batch Reactor with Rotary Impeller od Mariola Saternus, Tomasz Merder

    Izdano 2018-09-01
    Polni tekst
    Artigo
    Dodaj v priljubljene
    Shranjeno v:
  5. 5

    Modern Trends in Foundry od Mariola Saternus, Ladislav Socha

    Izdano 2023-07-01
    Polni tekst
    Artigo
    Dodaj v priljubljene
    Shranjeno v:
  6. 6

    Statement of Peer Review od Ladislav Socha, Mariola Saternus, Tomasz Merder

    Izdano 2024-10-01
    Polni tekst
    Artigo
    Dodaj v priljubljene
    Shranjeno v:
  7. 7

    Preface of the 31st International Scientific Conference on Modern Metallurgy—Iron and Steelmaking 2024 od Ladislav Socha, Mariola Saternus, Tomasz Merder

    Izdano 2024-10-01
    Polni tekst
    Artigo
    Dodaj v priljubljene
    Shranjeno v:
  8. 8

    Application of Discrete Event Simulation in the Analysis of Electricity Consumption in Logistics Processes od Szymon Pawlak, Mariola Saternus, Krzysztof Nowacki

    Izdano 2025-08-01
    Polni tekst
    Artigo
    Dodaj v priljubljene
    Shranjeno v:
  9. 9

    Modelling of Technological Parameters of Aluminium Melt Refining in the Ladle by Blowing of Inert Gas through the Rotating Impeller od Josef Walek, Karel Michalek, Markéta Tkadlečková, Mariola Saternus

    Izdano 2021-02-01
    Polni tekst
    Artigo
    Dodaj v priljubljene
    Shranjeno v:
  10. 10

    Modelling of a Slot-Type Porous Plug with a New Design od Jacek Pieprzyca, Tomasz Merder, Robert Wende, Jerzy Witek, Mariola Saternus

    Izdano 2024-08-01
    Polni tekst
    Artigo
    Dodaj v priljubljene
    Shranjeno v:
  11. 11

    Physical modeling of two-phase liquid–gas processes occurring in the refining ladle for Fe–Si alloy refining process od Tomasz Merder, Sławomir Kozłowski, Jacek Pieprzyca, Mariola Saternus, Agnieszka Sobianowska-Turek, Ladislav Socha

    Izdano 2024-07-01
    Polni tekst
    Artigo
    Dodaj v priljubljene
    Shranjeno v:
  12. 12

    Hydrometallurgical Recycling Process for Mobile Phone Printed Circuit Boards Using Ozone od Silvie Brožová, Magdalena Lisińska, Mariola Saternus, Bernadeta Gajda, Gražyna Simha Martynková, Aleš Slíva

    Izdano 2021-05-01
    Polni tekst
    Artigo
    Dodaj v priljubljene
    Shranjeno v:
  13. 13

    Impact of Rotor Design on Its Wear and Work Efficiency of the Aluminum Refining Process od Tomáš Prášil, Ladislav Socha, Karel Gryc, Jana Svizelová, Mariola Saternus, Tomasz Merder, Jacek Pieprzyca, Martin Gráf

    Izdano 2022-10-01
    Polni tekst
    Artigo
    Dodaj v priljubljene
    Shranjeno v:
  14. 14

    New design solution for porous plug in the argon steel purging process od Tomasz Merder, Marek Warzecha, Jacek Pieprzyca, Piotr Warzecha, Mariola Saternus, Robert Wende, Jerzy Witek, Ladislav Socha

    Izdano 2025-07-01
    Polni tekst
    Artigo
    Dodaj v priljubljene
    Shranjeno v:
  15. 15

    Assessment of refining efficiency during the refining cycle in a foundry degassing unit in industrial conditions od Ladislav Socha, Tomáš Prášil, Karel Gryc, Jana Svizelova, Mariola Saternus, Tomasz Merder, Jacek Pieprzyca, Petr Nuska

    Izdano 2024-01-01
    Polni tekst
    Artigo
    Dodaj v priljubljene
    Shranjeno v:
  16. 16

    Research on the impact of rotor wear on the effectiveness of the aluminium refining process od Ladislav Socha, Tomáš Prášil, Karel Gryc, Jana Svizelova, Mariola Saternus, Tomasz Merder, Jacek Pieprzyca, Petr Nuska

    Izdano 2023-10-01
    Polni tekst
    Artigo
    Dodaj v priljubljene
    Shranjeno v:
  17. 17

    Efficiency of aluminium refining on a foundry degassing unit depending on the rotor geometry and the degree of its wear od Jan Kolínský, Ladislav Socha, Jana Sviželová, Tomáš Prášil, Mariola Saternus, Tomasz Merder, Jacek Pieprzyca, Josef Häusler

    Izdano 2025-07-01
    Polni tekst
    Artigo
    Dodaj v priljubljene
    Shranjeno v:

Iskalna orodja: